نحوه نصب پلاگین PolyBoost

MSB_GRAPH

Active Member
سلام دوستان خسته نباشید.
کسی میدونه این پلاگین PolyBoost چطور نصب نصب میشه و آیا کرک داره؟
ممنون میشم کمک کنید.
 

Mehdi_Lover3dsmax

مسئول مدرسه گرافیکی سه بعدی
سلام
اولا POLYBOOST_V4.0 رو نصب کن نه POLYBOOST_V4.1 چون باگ داره
دوما
1. Extract PolyBoost_v4.zip to 3ds max's scripts dir.

2. Run the keygen from 3ds max and write down the serial number.

3. Run PolyBoost_Setup.mse, follow the instruction and when
you'll be prompted to authorize enter the serial from the
keygen and press "Authorize".

اگه بخوام معنی کنم یعنی اول پوشه رو کپی کن توی ریشه scripts بعدش
از توی مکس از قسمت utilities و maxscrip , runscript مسیر پوشهای که کپی کردی رو بده و PolyBoost_Setup.mse رو اجرا کن
بعد که کرک خواست از کرکش استفاده کن
کرکش هم اسکریپته اگه درگش کنی توی محیط اجرا میشه بهت سریال رو میده که باهاش کرک کنی
البته من بیشتر توضیح دادم این خارجییا یکم خارجی نوشته :)
حالا برام سواله اگه نصبش کردی بلدی باهاش کار کنی :green:
 

CG_Master

کاربر متخصص انیمیشن
اینم از آموزشش :



headervideos.jpg

Below you can download and view a few videos showing some of the features of PolyBoost in action. These videos should give you a good idea what PolyBoost is about. Download the Techsmith codec if needed at the bottom of this page.
NEW!
PolyBoost 4.0 preview (15 MB, 600x580, 3 min 2 sec)
Showing PolyBoost speed, Symmetry Tools, Texture Wrap,
Texture Tools, Selection Tools


PolyBoost 3.0 preview (14,5 MB, 600x600, 6 min 41 sec)
Showing Space Loop, Curve Loop, Straighten Loop, Circle Loop, Relax Loop, UV Lineup, PolyDraw, Similar

PolyBoost 2.5 preview (3,9 MB, 700x584, 1 min 27 sec)
Showing PolyShift, Quadrify

PolyBoost 2.1 preview (7,2 MB, 472x628, 2 min 57 sec)
Showing Interface, Automatic updates, SwiftLoop, PolyBranch

PolyBoost 2.0 preview (42,6 MB, 624x596, 8 min 45 sec)
Showing PolyDraw, Modeling, Viewport Canvas, UVW Tweak

PolyBoost 1.5 Upgrade (13,0 MB, 592x560, 5 min 10 sec)
Showing PolyDraw, Modeling, Selection, UnwrapUVW

Teaser video 1 (4,4 MB, 640x600, 6 min 20 sec)
Showing Selection, Modeling, Patternmaker
Teaser video 2 (8,9 MB, 640x600, 3 min 50 sec)
Showing PaintConnect, FlowConnect, Selection, BitmapSelect
Teaser video 3 (5,5 MB, 520x436, 2 min 40 sec)
Showing AdjustLoops, UnwrapUVW, Transform
These videos are encoded with the Techsmith codec, get it here: Techsmith codec

 

MSB_GRAPH

Active Member
سلام
اولا POLYBOOST_V4.0 رو نصب کن نه POLYBOOST_V4.1 چون باگ داره
دوما
1. Extract PolyBoost_v4.zip to 3ds max's scripts dir.

2. Run the keygen from 3ds max and write down the serial number.

3. Run PolyBoost_Setup.mse, follow the instruction and when
you'll be prompted to authorize enter the serial from the
keygen and press "Authorize".

اگه بخوام معنی کنم یعنی اول پوشه رو کپی کن توی ریشه scripts بعدش
از توی مکس از قسمت utilities و maxscrip , runscript مسیر پوشهای که کپی کردی رو بده و PolyBoost_Setup.mse رو اجرا کن
بعد که کرک خواست از کرکش استفاده کن
کرکش هم اسکریپته اگه درگش کنی توی محیط اجرا میشه بهت سریال رو میده که باهاش کرک کنی
البته من بیشتر توضیح دادم این خارجییا یکم خارجی نوشته :)
حالا برام سواله اگه نصبش کردی بلدی باهاش کار کنی :green:
اول این ممنون از توضیح
دوم این که بله وقتی 3.50 دقیقه آموزش تصویری رو داشته باشی می تونی باهش کار کنی.:cool:
 

MSB_GRAPH

Active Member
راستی مال من کرک نداره اگر مقدور هست آدرس رو بدین دانلود کنم البته همش باشه چه بهتر.
 

Mehdi_Lover3dsmax

مسئول مدرسه گرافیکی سه بعدی
pclord جان این ورژن 4.1 هست که باگ داره
موقع کار کردن درست snap نمیکنه اینجوری یعنی اصلا نمیشه باهاش کار کرد
در ضمن توی مکس 2010 شده جز sdk یعنی سرعت عملکرد دستورها برابر با ابزارهای خود مکس هست
 

jassemroosta

New Member
با سلام
دوست عزیز اگر امکان داره این کد رو برای من به ایمیل:
[email protected]
ارسال کن. من کلی توی اینترنت جستحو کردم و تنها همین مطلب رو دقیق و صریح دیدم.
با تشکر از لطفت
 

جدیدترین ارسال ها

بالا