Active Member
isoBuster v1.9 build

Crack is attached
rar pw :
isoBuster یه برنامه چندکاره در رمینه ی CD و DVD هست ، کار اصلی این برنامه rip کردن CD های مشکل دار و خش دار هست ، ولی امکان تهیه ی کپی از CD های قفل گذاری شده رو هم داره ؛

Rescue lost files from a bad or trashed CD or DVD !
Save important documents, precious pictures or video from the family, your only system backup, ...
IsoBuster can do it all !

IsoBuster is a highly specialized yet easy to use CD and DVD data recovery tool. It supports all CD and DVD formats and all common CD and DVD file-systems (= set of files and folders). Start up IsoBuster, Insert a CD or DVD, select the drive (if not selected already) and let IsoBuster mount the media. IsoBuster immediately shows you all the tracks and sessions located on the media, combined with all file-systems that are present. This way you get easy access, just like explorer, to all the files and folders per file-system. Instead of being limited to one file-system that the OS picks for you, you have access to "the complete picture". Access data from older sessions, access data that your OS (e.g. Windows) does not see or hides from you etc.

Combine this all-revealing functionality with far better read and recovery mechanisms, scanning for lost files functionality, workarounds for a wide range of drive and software bugs, limitations or shortcomings and you have an enormously powerful data recovery tool. IsoBuster is must-have-software for every PC user and is deliberately kept low priced to be able to offer a solution for everybody, even if it is much used in the professional optical and data forensics world.

click to enlarge

click to enlarge

IsoBuster 1.9 (Build

This version features:


- Ability to create managed image files (*.IBP and *.IBQ)
- Stop creation at any time.
- Continue creation at any time.
- Fill the gaps left during failed reads.
- Use different drives to complete an image of a bad disc. 

* In other words the amazing ability to create an image file of a bad disc 
using many different drives that all do their part
to finally have a resulting image that can be used to recover all missing data
- Support for multiple "virtual sessions" inside a single session, single track, 
on DVD+RW or DVD-RW, created by ASHAMPOO.
- Ability to set/reset file-extension association via the Options 
(besides via the installation procedure).
- Ability to have IsoBuster beep after extraction, 
after a scan for lost files or after a surface scan (Set in Options)
- Ability to have IsoBuster sort files and folders immediately and
automatically after their parent folder is parsed. (Set in Options)
- Ability to have IsoBuster put folders on top immediately and
automatically after their parent folder is parsed. (Set in Options)
- Ability to enable/disable showing certain status icons 
for files and folders (Set in Options)
- Ability to change files found based on their signature, 
ability to change their address, length or even delete and add files. 
(Set in Options)
- Ability to perform the Online check with Auto-detection of Proxy settings, 
Manual Proxy settings or Proxy settings via a URL (Advanced Online Check Options)
- Ability to avoid a number of messages. A large number of them are new,
related to *.IBP, *.IBQ. Set or Reset displaying them in the Options.
- Support Multi volume Image-file-format *.000, *.001, *.002, *.003, 
(made by Unix DD (or so they say))
- Support Multi volume Image-file-format *.AA, *.AB, *.AC, ... , *.BA, *.BB, ... 
(made by Unix Split (or so they say))
- Support Multi volume Image-file-format *.nrg, *.nrg.001, *.nrg.002, *.nrg.003.
- Ability to skip files each time an error is encountered in them
(when extracting multiple files at once)
- Ability to pause extraction of an image file, and resume later or abort.
- Ability to pause finding lost files and folders, and resume later or abort.
- Prompt when no files or folders could be found to avoid confusion.
New users sometimes think that a track is a missing file that needs to be manipulated somehow.

Improvements :

- Added recognition for more DVD mastering software, 
enabling direct IFO/VOB mounting.
- Reduce retry count when scanning for lost files and after continued errors. 
- Compensation for abnormally long tracks 
(when the drive is confused about the length)
- Speed (via memory management) improvement 
For when many (millions) of small files are found based on their signature.
- Also list the LBA (Address) of files listed as unreadable after a scan.
- Various improvements in the file-signature recognition part, 
more file types are supported, far less false positives.
- Reference to the *.cdt (cd-text) files from the *.cue file 
with relative filename instead of absolute filename.
- Improved support for +VR recorders that do not write the _RM.BUP file 
in the open track (or at least not point directly to it from the reserved track (virtual content))
- Compensation for various +VR mastering bugs by the Magnus DVD+VR writer.
- Put more relevant data in *.cue files (and read back)
- More escapes to stop try mounting a CD/DVD when the media is being written or formatted
- Removed displaying MSF addresses on DVD in the Extract From-To dialogue.
- Changed the default block size of unrecognised image files 
to 2K per block instead of 2352 bytes block.
- Immediately display the red (x) icon next to files 
that are located in unreadable areas, 
if that can be determined immediately,
(e.g. when the file is located outside the track (e.g. after am incomplete write)).
In older versions first a surface scan or "find lost files ..." needed to be performed. 
Files located on unread surface are still 'readable' 
(no (x) mark) is shown until proven differently (after failed read)
- Changed the order of Wnaspi32.dll loading so that a dll in the program folder itself 

gets priority over a dll in the system folder.

So the Nero wnaspi32.dll for instance (if copied in the project folder) 
is used instead of the (Adaptec) wnaspi32.dll in the System folder.
Display the LoadSegment also in Hex, for a bootable CD's Boot Image file, 
in the file properties.
- Implemented a work around for buggy mastering where the Joliet file-system 
doesn't contain proper directory information beyond 8 levels deep.
- Various smaller changes and improvements
Bug Fixes :
- Fixed a division by zero error when a *.000 image file was loaded 
(If the file was generic instead of part of VC4)
- Under certain conditions the MSF addresses could be wrong for tracks
on DVDs when they were recorded in the *.cue file.
- Catch an error message when trying to use system animations that aren't there anymore.
Vista early beta has replaced some of these animations. Until Vista public betas
become available no animations will be shown when they are not where they used to be.
(e.g. during file extraction)
- On certain NT systems (2K, XP) in combination with certain RAID controllers 
it was possibe that some drives couldn't be found. Now they are found.
- Implemented fix that hopefully prevents the extraction window to disappear behind the main window 
(work around for Windows and compiler behaviour)
26 Dec 2005

پیوست ها

  • keygen.rar
    55 کیلوبایت · بازدیدها: 5


Active Member
IsoBuster Pro 1.9.1 - Final

Isobuster interprets CD image files, such as:
*.DAO (Duplicator), *.TAO (Duplicator), *.ISO (Nero, BlindRead, Creator), *.BIN (CDRWin), *.IMG (CloneCD), *.CCD (CloneCD) , *.CIF (Creator), *.FCD (Uncompressed), *.NRG (Nero), *.GCD (Prassi), *.P01 (Toast), *.C2D (WinOnCD), *.CUE (CDRWin), *.CDI (DiscJuggler), *.CD (CD-i OptImage), *.GI (Prassi PrimoDVD), *.PXI (PlexTools), *.MDS (Alcohol), *.MDF (Alcohol), *.VC4 (Virtual CD), *.000 (Virtual CD), *.B5T (BlindWrite), *.B5I (BlindWrite), *.DMG (Apple Macintosh), *.IBP (IsoBuster), *.IBQ (IsoBuster)..


This download version contains :
- All up to date language plug-ins
- An English installation wizard
- An English Help file


IsoBuster splash screen, which will stick until the main window is loaded, which can take a while sometimes when a drive is just mounting a 'difficult' disc and is not responding to commands immediately.
Added option to the GUI (in Options) for administrators to grant low level access to storage devices for other users on the system.
Multi-language support in the installer itself.
IsoBuster theme in About box.
Various icon improvements.
An object selection is now also available and accessible via the Main Window (File / Sel. Object(s))
Shift+F10 and context menu (between Alt Gr and Ctrl on the right) button click implemented.
*.NCD (or subsets of *.NCD) image file support.
The multi-extent icon next to a file or folder is *not* shown anymore by default, after a fresh install, to avoid confusion, set it in the options if required.


Updated some of the auto recognizing features for Movie DVDs.
Changed the more-sessions-in-one-track interpreter to also be able to deal with Nero Cmd made discs (they don't have the typical Nero signature)
Work-around for a particular drive problem (DL-DT-ST DVD-ROM GDR8163B, or possibly a generation of drives) which caused DVD(+R/W) media not to be mounted OK.
Tracks and Sessions were not always correctly identified.
Improvement to match IBP/IBQ managed image files to actual CDs in certain drives better, has to do with reserved tracks.
Load read-only (write protect) IBP/IBQ files but put up a dialog warning for the user and allow him/her to unload the image again.
Addded a dialog for when the IsoBuster.exe has been changed, to warn the user that there might be a virus on the system.
Filter and replace illegal characters in file names before extraction for all file-systems, not just only for HFS.
Various changes here and there to work better with Vista public Beta 2, which has changed considerably compared to previous Vista beta version.
Various internal improvements, staying up to date with drive evolutions.


Fixed some minor GUI related issues. You probably never noticed.
Fixed a rare situation where IB could run into an exception error when there is NO file-system layout on the disc.
Fixed small bug in the HFS file-extension recognition. Not all known extensions were actually assigned.
Fixed that some extracted files, via the Mac HFS+ file system, were 2KB too big.
For most files this is no problem, but for text files some editors would display the extra rubbish at the end which is potentionally annoying​

جدیدترین ارسال ها